Aritech ATS3000 Guia do Utilizador descarregar pdf (Página 33)

ATS2000/3000/4000/4500 Manager’s Guide

5. From the display you can now:

Option Action

Display the complete zone name Enter the zone number and

press [ENTER]

Update the list of zones and display the remaining

zones (if any)

Press [NEXT]

Exit Press [ENTER]

7. SERVICE MENU

Use this function to allow the user to request a service call or to establish a connection to

a remote service centre in order to program over the telephone network. There are six

ten options available.

Table 1: Service menu options

Option

no.

Option name Description

Request Service

Technician

Sends a request for a service technician to the

central station. (Not available in all reporting

formats.)

Disconnect

Management Software

Terminates the connection to management

software.

Dial Management

Software

The control panel dials the pre-programmed

service telephone number and attempts to

connect to the remote service modem in order to

allow programming changes to be made over

the telephone network. If it fails on the first try, it

will not redial.

The panel automatically drops the line if there

have been no keys pressed by the remote

service operator within the last two minutes.

Dial Temporary

Management Software

Allows a temporary telephone number to be

programmed and dialled for the remote

computer/RAS connection.

Direct (via J18)

Management Software

The control panel establishes a temporary direct

connection to a PC connected to the serial port

(J18) on the motherboard. This is a Service

Technician option only.

Answer Management

Software

Instructs the control panel to answer a current

dial-in attempt immediately.

Siren test

Triggers the internal siren for three seconds

followed by the external siren and finally the

flash

Voice report phone

message

If you have a voice reporting protocol on central

station 4, you can change the first telephone

number of that central station.

9 Stop voice reporting

Allows the user to stop voice reporting for any

central station programmed for Voice Reporting.

RAS test

Tests the LEDs, the LCD display and buzzer of

the RAS you are working with.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 70 71

Comentários a estes Manuais

Sem comentários

Aritech ATS3000 Guia do Utilizador Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Aritech ATS3000