Aritech ADVISOR CD 7203 Manual do Utilizador descarregar pdf (Página 33)

Manager Manual for CD72/95/15003 Page 33

ARMING A SPLIT SYSTEM AS A BASIC USER

As explained at the beginning of the chapter, two different ‘standby’ displays and two different ‘selection’

displays can be shown. The instructions below use the “Status” displays.

Because the system is split, you can select one or more areas from the available security areas.

1. Go to the keypad. This shows the status of the areas.

Areas 1 and 2 are disarmed.

1 2

2. Press the 0 key and then enter your code. A ‘*’ appears in the

display for every key you press. Use the 0 key to cancel an

incorrect entry and to restart a new entry of the code.

Enter Code

0 + code

Enter Code ****

3. An underscore appears alternately under ‘1’ and ‘2’. Enter

the number of the area required.

1 2

To arm area 1, therefore, enter ‘1’.

1 2 3

4 5 7

7 8 9

Normal Set

Area 1 is arming. If programmed, the beeper for area 1 will

start.

Beeeep

4. The exit time for area 1 is operating.

Area 2 is still disarmed.

=1= 2

As long as the underscore is still alternating under ‘1’ and

‘2’, you can still arm area 2.

To arm area 2, therefore, enter ‘2’ .

1 2 3

4 5 7

7 8 9

Normal Set

Area 1 is arming.

Area 2 is now also arming.

If programmed, the beeper for area 2 will start..

Beeeep

The exit time for areas 1 and 2 is operating.

=1= =2=

The current status of the areas automatically appears.

Both areas are now armed.

[1] [2]

Technical Manuals Online! - http://www.tech-man.com

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 107 108

Comentários a estes Manuais

Sem comentários

Aritech ADVISOR CD 7203 Manual do Utilizador Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Aritech ADVISOR CD 7203